. Insert the CD that came with the printer into the disk drive. Select Language then click OK.
Click Next. Select Wireless Network Connection, click Next. Select Brother Peer to Peer Network Printer, click Next. Select Change Firewall port settings to enable network connection and continue with the installation.
Select Yes, I have a USB cable to use for installation, then click Next. Make sure you have the SSID and network or key password. Select the Checked and confirmed box. Make sure the power is on for the printer.
Plug in the USB cable from the Brother printer to the computer. The installation window displays. Click Close. If you have more than one network, select the correct one and click Next. Enter the network password and click Next. A progress bar displays.
Disconnect the cable from the computer and click Next. Do one of the following:. If the printer doesn’t display, click Wireless Setup and start over. If the Brother QL-720NW, QL-710W, or QL-810W printer displays, click Next and click Finish. Once the installation is complete, you must select the printer and printer settings. Selecting the Printer and Printer Settings Once the printer is installed you need to select the correct printer settings. Click Start.
Click Devices and Printers and select the correct printer. Do not select Brother QL-720NW-USB, QL-710W USB, or QL-810W-USB.
Right-click and select Printing Preferences. On the Basic tab, click the Paper Size drop-down list and select 2.4”. Right-click, and select Printing Properties. Click the Advanced tab, and then click Printing Defaults. On the Basic tab, click the Paper Size drop-down list and select 2.4”. Click Apply OK.
On the General tab, click Print Test Page. After the test page prints, click OK. Click Start.
Click Devices and Printers and select the correct printer. Do not select Brother QL-720NW-USB, QL-710W USB, or QL-810W-USB. Right-click and select Printing Preferences. On the Basic tab, click the Paper Size drop-down list and select 2.4”.
Right-click, and select Printing Properties. Click the Advanced tab, and then click Printing Defaults. On the Basic tab, click the Paper Size drop-down list and select 2.4”.
Click Apply OK. On the General tab, click Print Test Page. After the test page prints, click OK. Open PDS Church Office. Click Families or Members.
Click Reports. Click Label/Envelope Reports in Upper Case or Label/Envelope Reports in Mixed Case. Click Family Mailing Label or Member Mailing Label. Click Next Next. For the printer, select Brother Printer.
For the orientation, select Landscape. Select a paper size that matches the labels you're using. Click Next. For the label style, click Edit Style. Select the Continuous Form and Dedicated Label Maker check boxes. Click Save/OK, and then save the style.
Click Next Preview. After downloading the wizard, you can install the printer drivers. On your computer, browse to the Downloads folder. Custom embossed padfolio.
In the Downloads folder, double-click BrotherWDSW. Double click BrotherWDSW.pkg. Click Continue Continue for Software License Agreement.
Select Agree, and click Install. Enter the Admin Name and Password, and click Install Software.
Double-click on the correct folder, and select Setup Wizard. Make sure you have a USB cable ready to use, and click Yes, I have a USB cable to use for installation. Click Next. Make sure you have the SSID/ESSID and network key, and click Checked and confirmed to continue. If your computer doesn’t have Java SE 6, click Install.
You must have Java SE6 installed to continue installation. If you’re not sure what version of Java you have, this site will tell you. Click OK for installing 1 item, and click Next. Connect the USB cable from the printer to the computer, and click Next. If there is more than one network, a network list displays. Select the correct network, and click Next. Enter the network password, and reenter it to confirm.
Click Install Software. Do one of the following: a.) To let the system find the IP address, click Next. B.) To enter a static IP address with subnet, click Change IP Address. Click Close. Disconnect the USB cable. Click Finish. Installing the Printer Follow these instructions to unzip the downloaded file and install the Brother wireless printer.
Select the downloaded file. Browse to C: Brother Install then click OK.
Click Unzip. Select Close. Choose the correct install. For the Brother QL-720NW, double click C: Brother Install qd720ww651avt64us Dsetup. For the Brother QL-710N, double click C: Brother Install qd710ww651avt64us Dsetup. For the Brother QL-810W, double click C: Brother Install qd810ww651avt64us Dsetup.
The installation wizard displays. Click Next.
Select Wireless Network Connection and click Next. Click Next for the Destination folder. Select Brother Peer to Peer Printer and click Next. Select Change Firewall port settings to enable network connection and continue with the installation and click Next. Select Yes, I have a USB cable to use for installation and click Next. Plug in the USB cable.
Make sure you have the SSID and network or key password. Select the Checked and confirmed box and click Next. Make sure the power is on for the printer. The installation window displays. Once the wireless network is detected, check to make sure that the SSIS is correct. Select Yes and click Next. Disconnect the cable from the computer and click Next.
Do one of the following:. If the printer doesn’t display, click Wireless Setup and start over. If the Brother QL-720NW, QL-710W, or Brother QL-810W printer displays, click Next and then click Finish to restart the computer. Once the installation is complete, you must select the printer and printer settings. Selecting the Printer and Printer Settings After the printer is installed you need to select the correct printer and settings. Click Start. Click Devices and Printers and select the correct printer.
Do not select Brother QL-720NW-USB, QL-710W USB, or QL-810W-USB. Right-click and select Printing Preferences. On the Basic tab, click the Paper Size drop-down list and select 2.4”. Right-click, and select Printing Properties.
Setup Brother Ql 810w Label Printer For Mac
Click the Advanced tab, and then click Printing Defaults. On the Basic tab, click the Paper Size drop-down list and select 2.4”. Click Apply OK. On the General tab, click Print Test Page. After the test page prints, click OK. Click Start.
Click Devices and Printers and select the correct printer. Do not select Brother QL-720NW-USB, QL-710W USB, or QL-810W-USB. Right-click and select Printing Preferences. On the Basic tab, click the Paper Size drop-down list and select 2.4”. Right-click, and select Printing Properties. Click the Advanced tab, and then click Printing Defaults.
On the Basic tab, click the Paper Size drop-down list and select 2.4”. Click Apply OK. On the General tab, click Print Test Page. After the test page prints, click OK. Open PDS Church Office. Click Families or Members.
Click Reports. Click Label/Envelope Reports in Upper Case or Label/Envelope Reports in Mixed Case. Click Family Mailing Label or Member Mailing Label. Click Next Next.
For the printer, select Brother Printer. For the orientation, select Landscape. Select a paper size that matches the labels you're using. Click Next. For the label style, click Edit Style.
Brother Ql 810w Software
Select the Continuous Form and Dedicated Label Maker check boxes. Click Save/OK, and then save the style. Click Next Preview. Go to Finder your computer name Downloads. In the Download folder select BrotherWDSW. Double click BrotherWDSW.pkg.
Click Continue Continue for Software License Agreement. Select Agree and then click Install. Enter the Admin Name and Password and then click Install Software. Double click on the correct folder and select Setup Wizard. Make sure you have a USB cable ready to use and click Yes, I have a USB cable to use for installation. Click Next.
Make sure you have the SSID/ESSID and network key. Click Checked and confirmed to continue. If the computer doesn’t have Java SE 6 click Install. You must have Java SE6 installed to continue installation. If you’re not sure what version of Java you have, will tell you.
Click OK for installing 1 item and then click Next. Connect the USB cable from the printer to the computer and click Next. If there is more than one network, a network list displays. Select the correct network and click Next. Enter the network password and reenter it to confirm. Click Install Software.
Do one of the following:. To let the system find the IP address and click Next. To enter a static IP address with subnet, click Change IP Address. Click Close. Disconnect the USB cable. Click Finish.
Written by Sabrina Treitz Updated over a week ago Welkio Access supports Brother Printers QL-710W, QL-720NW, QL-810W, and QL-820NWB. Before connecting with Access, your printer will require set up via a Mac or PC. Once your printer is set up, it’s easy to connect with Access and start printing guest badges. Important to know before starting: Your printer will have its own IP address assigned to it, and in order to set it up, your printer, computer, and iPads will all need to be connected to the same WiFi network. Initial setup for your Label Printer.
Connect the power cord to your label printer, and then plug the power cord into an electrical outlet. Press and hold the On/Off button to turn the printer off and then insert the.
Connect your Printer to your computer You’ll first need to download some software. See the following pages for downloads specific to your printer type:,. Whether you are using a Mac or PC, you'll need to download and install the Driver.
Follow the Brother Printer steps to install the Driver for your label printer. Then, you will need to download and install the Wireless Device Setup Wizard (Mac) or the Printer Setting Tool (PC). Connect your printer to your computer via the USB cord. Connect Your Printer to WiFi Mac Once downloaded, open the Wireless Device Setup Wizard (Mac) and follow these to connect your printer to your Wi-Fi network. PC Once downloaded, open the Printer Setting Tool and follow these steps:.
Open Communication Settings. Select the Wireless LAN tab, and click on Wireless Settings. Select your Wi-Fi network, making sure it’s on the same network as your iPad. Then enter your Wi-Fi password.
Note: If the light on the printer is green, it means that you have successfully connected. Assign an IP address to your Printer. Using your printer’s control panel, assign a static IP address to your printer. Note: this may require the help and support of your IT department. Hold down the Cut button for 5 seconds and release to print diagnostic information. This will print four sheets of paper, one of which will have your IP address. Connect your Printer to Access.
Make sure your iPad is on the same Wi-Fi network as your printer. From your computer, open the Access dashboard and click Settings. Then tap Printer & Wi-Fi. Select your printer model and enter your IP address.